701ASSM505W

Water cooled MIG welding machine with synergetic mode feature and inverter technology.

Continuous welding and high quality weld beads with sound appearance are obtained by using Ø 0.8 – 1.6 mm steel wires and Ø 1.2 – 1.6 mm flux-cored wires on structural steels used in general manufacturing and steel construction industry. Provides trouble-free welding with low spatter under CO2 gas protection.

• By using the synergetic mode feature, it is sufficient to adjust only the wire feed speed. The voltage rate is automatically controlled and adjusted by the machine.

• Due to the adjustable inductance feature, the risk of spatter and slag formation is minimized and arc stability increases.

•         2/4 Trigger Mode options.

• Soft-Start feature facilitates arc formation at the beginning of the welding process and a Soft-End feature prevents crater cracking and porosity formation at the end of the welding process.

• Burnback Control feature ensures that the welding wire coming out of the contact nozzle is of an appropriate length and does not stick to the contact nozzle after welding.

• Pre-Gas and Post-Gas times can be adjusted. By this means, a smooth start at the beginning of the welding and an ideal gas protection at the end of the welding are obtained during the set time.

• Arc Force and Hot Start features (in MMA mode).

• Memory feature that provides quick access to prerecorded welding parameters. Four separate records can be stored in the memory.

• Two digital displays for welding current and welding voltage.

• Thermal protection circuit and warning lamp against thermal overloads.

• Super MIG 505W power source

• Super Feed MF-5 wire feeder

• SC-5 cooler

• 4m work cable

• Hose clip

• Wire spool adapter

• Drive Rolls for 0.8 1.0 1.2 and 1.6 mm solid wire

• Fuses

• Weldind spray