81AS205TP-4M

Thanks to its DC current characteristics, it gives excellent results in TIG welding of carbon steels and stainless steels.

You can obtain seamlessly covered electrode welding with 2.5, 3.25 and 4.0 mm diameter rutile, basic and stainless electrodes on unalloyed, low alloyed and stainless steel materials.

• The metal body of the Askaynak Inverter 205-TIG / PULSE welding machine is painted with the oven paint technique preferred in the automotive industry.

• If HF TIG feature is selected, you can start welding with high frequency feature without touching the tungsten electrode to the material you are going to weld.

• Thanks to the LIFT TIG feature, the arc starts when you touch the tip of the tungsten electrode to the material you are going to weld.

• Thanks to the crater current feature, the crater gap formed at the end of the welding is filled; the strength of the weld and the appearance of the weld seam do not deteriorate.”

• Thanks to its Pulse DC feature, you can weld thin materials without deformation with low heat input during welding.

• Thanks to the “Hall Sensor” technology, even if there are problems such as changing the distance of the welding electrode to the workpiece as a result of the operator losing hand sensitivity, the output current will not change and it will always be possible to make perfect welding at the set current value.

• Inverter 205 TIG Pulse Power Source

• 4m air cooled TIG torch

• 3m work cable and clamp

• 3m gas hose